Tempo, pulse, accents

Free Online Metronome – Tempo, Rhythm and Groove Practice

Practise time with tap tempo, meter, subdivisions, swing, custom accents, count-in, visual beats, and audio/MIDI BPM detection.

JolyMusic practice workspace

Stabilize time before you play

The metronome gives a clear reference for tempo, meter, subdivisions, swing, accents, and count-in without leaving the tool space.

Prepare the click

  1. Choose a tempo or tap it in.
  2. Set meter, beat unit, and subdivision.
  3. Choose sound, volume, and swing.
  4. Place useful accents, then start with a count-in when needed.
Tempo
100BPM
-- Bar --
1 2 3 4
Ready

Clock

Use the slider or arrow keys to set the metronome tempo from 30 to 260 BPM.

Feel and sound

Tempo detection

Detect BPM from a microphone pulse or incoming MIDI clock/notes.
-- BPM
Audio input
Idle
MIDI input
Idle
Start a detector to update the tempo automatically.

Accent map

Tap beats or subdivision cells to make them strong or light.
JolyMusic practice workspace

Understand Tempo, Meter and Rhythmic Feel

Tempo and pulse

BPM sets the speed of the selected pulse. Meter and beat unit describe how beats are grouped and named.

Subdivision and feel

The 2×, 3×, and 4× divisions reveal the inner spacing of the pulse. With a quarter-note beat unit they correspond to eighth notes, eighth-note triplets, and sixteenths; with another beat unit, the written note names change.

Build a useful tempo practice

  • Move the strong accent to another beat while keeping the same BPM.
  • Practise slowly with audible subdivision, then remove it to test your inner pulse.
  • Use Tap or audio/MIDI detection as a starting estimate, then adjust musically.

Tempo, meter, and beat unit

Tempo tells you how many pulses happen per minute. Meter groups those pulses; the beat unit says which written note value carries the pulse.

At the same BPM, 4/4 and 6/8 can imply different metric groupings and perceived pulses, depending on the selected beat unit and accent pattern. Two configurations can share identical click intervals while representing different metric structures.

Subdivisions and swing

Subdivision divides the selected pulse into 1×, 2×, 3×, or 4×. The written note names therefore depend on the selected beat unit.

Swing in this metronome applies only when subdivision is 2×: it lengthens one division and shortens the next, while keeping the pair duration and reference tempo unchanged.

Useful accents

The accent map trains more than the downbeat. Moving the accent shows whether you depend on the click or truly keep the meter.

The circular view helps you feel a cycle; the grid is faster for programming strong and light beats.

Tempo detection

Tap, microphone, and MIDI provide practical estimates. They help approach a performed tempo, but they do not replace musical listening.

A weak signal, unclear attack, or irregular rhythm can produce an unstable estimate.

Calculate time between beats

The duration of one reference pulse is T = 60 / BPM seconds. At 80 BPM, T = 0.75 s, so one pulse lasts 750 ms.

For a pulse of duration T, two equal subdivisions last T/2, three last T/3, and four last T/4. These formulas describe straight subdivisions, not swung timing.

Tempo Pulse Division 2× Division 3× Division 4×
60 BPM 1000 ms 500 ms 333 ms 250 ms
80 BPM 750 ms 375 ms 250 ms 188 ms
100 BPM 600 ms 300 ms 200 ms 150 ms
120 BPM 500 ms 250 ms 167 ms 125 ms

Simple, compound, and asymmetric meter

2/4, 3/4, and 4/4 often organize simple pulses. In a typical 6/8 measure, six eighth notes are grouped into two sets of three; the main felt beats are usually two dotted-quarter pulses, not six independent main beats.

The metronome supports beat count, written beat unit, and custom accents. Setting six eighth-note positions with accents on 1 and 4 expresses that grouping, but it does not change the underlying beat unit into a dotted-quarter click. At eighth note = 120 BPM, the dotted-quarter grouping corresponds to 40 dotted-quarter beats per minute; at dotted quarter = 80 BPM, the underlying eighth-note rate is 240 per minute. Use accents to suggest 2+3, 3+2, 2+2+3, or 3+2+2 groupings.

Progressive rhythm exercises

Use these settings as starting points. Increase difficulty only when breathing, attacks, and rests remain stable.

For 3-against-2, imagine one shared cycle split into six equal positions: the three-part rhythm attacks 0, 2, 4; the two-part rhythm attacks 0, 3; the pattern repeats at position 6. Set 60 BPM with 3× division and treat two reference pulses as one common cycle: the reference clicks provide the two-part layer, while you sing or tap the three-part layer. The metronome does not play both layers automatically.

Objective Settings Listening goal
Steady pulse 70 BPM, 4/4, beats only, accent on 1 Increase when ten bars stay even.
2× and 4× divisions 80 BPM, 4/4, subdivision 2× then 4× The flow changes, not the pulse.
3× division 72 BPM, 4/4, subdivision 3× Three equal placements inside each beat.
Backbeat 90 BPM, 4/4, accents on 2 and 4 The groove moves without rushing weak beats.
Accent displacement 80 BPM, 4/4, move the accent each bar The cycle stays clear even without accenting 1.
3-against-2 concept 60 BPM, 4/4, subdivision 3×; use two reference beats as one cycle Tap three evenly spaced attacks across the two reference beats; the clicks remain the two-part layer.
Inner pulse 70 BPM, remove subdivisions, then accents Keep rests as precise as clicks.
Tempo ladder Increase by 4 BPM steps Step back when accuracy drops.
Swing and shuffle 96 BPM, subdivision 2×, raise Swing Seek flexible placement, not a fixed ratio.
Asymmetric groups 5/8 or 7/8, unit 8, accents 2+3 or 2+2+3 The grouping stays readable for several cycles.

Latency, jitter, and detection

Playback uses Web Audio to schedule near-future clicks with a JavaScript scheduler. Output latency, Bluetooth, browser load, and device behavior can still change the feel.

Microphone detection looks for onsets in the signal; MIDI can follow clock or note-on events. A result may land at half-time or double-time when a pattern contains several pulse layers.

Troubleshooting

  • Playback and sound: if there is no sound, check browser volume, sound profile, and audio output. If playback does not start, click or tap the page first: some browsers block audio before a user gesture.
  • Microphone and MIDI detection: if detected BPM is unstable, play regular attacks and reduce background noise. If MIDI is unavailable, the browser or device may not support Web MIDI.
  • Rhythmic interpretation: accents are stronger clicks; subdivisions add clicks between beats. For 6/8, try six eighth-note positions with accents on 1 and 4 without mistaking that for a dotted-quarter click.
  • Latency and synchronization: swing is not a fixed triplet, and Bluetooth headphones can add enough latency to feel late.

Practice method

  • Start slower than the final tempo.
  • Keep the same BPM while changing only subdivisions.
  • Remove references gradually: fewer accents, fewer subdivisions, then only strong beats.
  • Save a preset when the setup matches a specific practice session.